The right kitchen cabinet hardware can complement and accentuate the lines colors and textures of your space.
Cabinet pull placement.
Some companies place knobs a little higher or.
How to choose cabinet hardware.
We know that placing knobs and pulls on cabinets can be difficult.
Center the hardware horizontally on the stile between 2 and 4 inches down from the top edge.
However there is one slight difference.
That s why we ve decided to pull together our best tips for making sure you place your hardware correctly.
When placing your.
Cabinet pulls have two screws as opposed to only one screw with a.
My kitchen cabinet hardware placement.
There are numerous templates and jigs as shown in figure 11 that will make the duplication of the positioning of the knobs and or pulls much easier than attempting to use a tape measure or ruler.
Figure 11 drawer knob cabinet door pull template.
Pulls will look great when they are placed directly in the corner of doors.
2 5 3 from top or bottom.
For knobs we recommend the knob holes be centered horizontally on the door stile and on upper cabinets place knob holes 2 1 2 up from the bottom of the door.
Where should cabinet pulls be placed.
Selection of drawer knob and cabinet door pull jigs and templates.
This placement is also the most practical putting the handles as much within reach as possible.
Lower cabinet pull or knob placement is similar to upper cabinet s.
While not a surprise when you drill holes in cabinets you can t undo the hole.
In traditional spaces the general rule to follow is knobs on doors and pulls on.
Following these tips will help you make your awesome new hardware really shine.
On lower cabinets place knob holes 2 1 2 down from the top of the door.
The guideline for hanging cabinet pulls is the same as hanging knobs i e.
Cabinet knob placement involves best practices a little bit of preference and the right tools to get the knobs and handles centered and perfect.
The same goes with pulls on cabinet doors.
The placement and positioning of cabinet hardware also makes a kitchen more functional.
If you are using elongated knobs such as egg knobs or t knobs place the installation hole so that the top of your knob is in line with the rail.
Knobs pulls and other handles are like jewelry for cabinets.
And just like with knob placement cabinets will look busy when the pull handles are placed flush with the door frame.
Most cabinet knobs today are installed by lining up the installation hole with the edge of the rail.
The main difference is you ll place them near the top of the door on the stile so you can reach them without bending over too far.
If you ve selected pulls either modern or traditional the same rules apply as knobs with placement.