You can simply plug it in and connect the speakers into an ac adaptor outlet.
Cable to connect pc speakers to tv.
It gives more volume and clarity to the audios.
Then plug the other end into the audio in port on the tv.
High end audio systems might employ the sony phillips digital interconnect format.
You can use this to connect your tv to the speakers.
1 press the source button on the tv remote and choose hdmi if hdmi cable is connected or pc if the vga cable is connected.
2 by default when you connect a tv to a pc the same image mirror image of your desktop appears on the tv.
Connector cable your computer speakers should come with the correct cable to plug them into the tv.
Plug one end of the cable into the headphone jack on your computer which is typically a green port.
Depending on the brand or model of tv there are up to five options that allow you to send audio from a tv antenna cable box or streaming device to an external sound system such as a soundbar home theater in a box system stereo receiver.
Connecting speakers or headphones to a 3 5 mm mini jack.
How to connect computer speakers to your television connect using headphone jacks.
Nowadays most tvs have a headphone jack that matches your computer speakers.
They re the same connector used on phones tablets laptops etc.
A better alternative to a tv s internal speakers is to connect the set to an external sound system.
It may not be the ultimate sound system but it s still a lot better than the tv s built in speakers.
It requires special optical cables and equipment used only by serious audiophiles and has separate s pdif connectors.
Using 3 5mm analogue cables.
If your tv doesn t use rca connectors for audio output it may have a headphone out port 3 5mm port.
Connecting computer speakers to tv.
Tv sets with rca audio outputs use standard one quarter inch stereo cables and plugs to hook up with external audio components.
This is the easiest and simplest way to connect pc speakers to your flat screen or any other television.
If you have trouble connecting speakers or headphones to your computer try the following steps.
One for input s pdif in.
Speakers for a home stereo system typically use two strand speaker wire to connect with a pair of terminals on the rear of the speaker.
For this you ll need to use a 3 5mm audio jack on the tv end and a rca jack on the.
The standard pc setup is to plug a set of stereo speakers into the audio output jacks on the i o panel located on the back of the typical pc.
Connect your computer to the tv with a male to male audio cable.
All you need are.